g-C3N4催化石墨化碳质材料的制备及光催化性能研究

通常采用以氢氧化物作为造孔剂,过渡金属硝酸盐或氯化物作为石墨化催化剂的传统两步法策略制备多孔石墨化碳材料。然而制备过程中多涉及有毒和腐蚀性试剂,且多步骤的过程耗时较长。本文以双氰胺为原料通过热缩聚反应得到g-C₃N₄,采用高铁酸钾为催化剂一步法实现g-C₃N₄的同步碳化-石墨化,并研究其光催化性能。与传统的两步法相比,该方法耗时少、效率高、无污染。与初始的g-C₃N₄材料相比,石墨化g-C₃N₄衍生碳质材料不仅显著改善了可见光的吸收,而且大大增强了光催化活性。研究了不同石墨化温度对g-C₃N₄衍生碳质材料在可见光下降解甲基橙溶液的影响。700 ℃下制备的衍生碳质材料的降解率为12.4 mg/g。光电化学测试结果表明,多孔g-C₃N₄衍生碳质材料的光生载流子密度、电荷分离和光电流(提高了5.4倍)均得到显著提高。因此,该简便、灵活方法为提高g-C₃N₄衍生碳质材料的吸附和光催化性能提供了一种有前景的、高效的途径。     

ZnO超细纳米线阵列的制备及其电化学性能

以Zn(NO₃)₂· 6H₂O和C₆H₁₂N₄为原材料,采用二步水热法在碳纤维布上合成了形貌尺寸均匀的ZnO超细纳米线阵列。用 X 射线衍射(XRD)和扫描电镜(SEM)对其晶体结构和形貌进行了表征,利用恒流充放电测试等手段对其进行电化学性能测试。测试结果表明,材料表现出优异的电化学性能。在200 mA/g的电流密度下循环150次后,ZnO超细纳米线阵列仍然约有730 mAh/g的充放电比容量,库伦效率保持在95%以上。在1 200 mA/g的大倍率条件下,材料的充放电比容量依旧可达481 mAh/g左右,表现出十分良好的循环稳定性和可逆性能,是一种较为理想的锂离子电池负极复合材料。     

导热增强聚乙二醇相变复合材料的制备及其性能

本文以聚乙二醇(PEG)为相变材料,通过添加不同的无机填料,采用熔融共混浇筑方式制备了导热增强型相变复合材料。 通过扫描电子显微镜(SEM)、热常数分析仪、差示扫描量热仪(DSC)、红外热成像和热重分析仪研究了所制备复合材料的微观结构、导热性能与相变过程。 研究结果表明,相比于碳酸钙和氧化铝,在相同添加含量下,氮化硼(BN)可有效提高PEG的导热系数,当BN质量分数为40%时,导热系数可达到3.40 W/(m·K);当填料添加量相同时,片状BN和不规则纳米碳酸钙(CaCO₃)比球形氧化铝(Al₂O₃)对PEG具有更加优良的定型效果,在相变过程中,能够更加有效阻隔PEG的流动,保持复合材料的形状稳定性。     

介孔碳材料抑制锂电池负极枝晶生长

为了解决锂电池负极表面锂枝晶生长带来的性能衰退和安全问题。 以沸石咪唑酯骨架-8(ZIF-8)为前驱体制得介孔碳材料(MCM),用于金属锂负极表面改性。 X射线粉末衍射(XRD)和拉曼光谱表明,退火制得的MCM具有一定的石墨化程度,N₂气吸脱附测试(BET)证明MCM具有典型的介孔特征。 对比不同温度退火样品的XRD、拉曼光谱和BET测试结果,确定900 ℃为最佳退火温度。 优化的MCM作为表面改性剂对金属锂负极进行改性研究。 电池充放电循环后,负极样品的XRD和扫描电子显微镜(SEM)测试表明,MCM能够通过均衡锂负极表面的电荷分布抑制金属锂的取向沉积和锂枝晶的生长。 本研究为制备抑制锂电池负极枝晶生长表面改性剂提供了一种简便而有效的合成方法,有利于锂电池循环寿命的延长和安全性能的提高。     

基于NiCo2O4纳米片电极的非对称混合电容器

The looming global energy crisis and ever-increasing energy demands have catalyzed the development of renewable energy storage systems. In this regard, supercapacitors (SCs) have attracted widespread attention because of their advantageous attributes such as high power density, excellent cycle stability, and environmental friendliness. However, SCs exhibit low energy density and it is important to optimize electrode materials to improve the overall performance of these devices. Among the various electrode materials available, spinel nickel cobaltate (NiCo₂O₄) is particularly interesting because of its excellent theoretical capacitance. Based on the understanding that the performances of the electrode materials strongly depend on their morphologies and structures, in this study, we successfully synthesized NiCo₂O₄ nanosheets on Ni foam via a simple hydrothermal route followed by calcination. The structures and morphologies of the as-synthesized products were characterized by X-ray diffraction, scanning electron microscopy, and Brunauer-Emmett-Teller (BET) surface area analysis, and the results showed that they were uniformly distributed on the Ni foam support. The surface chemical states of the elements in the samples were identified by X-ray photoelectron spectroscopy. The as-synthesized NiCo₂O₄ products were then tested as cathode materials for supercapacitors in a traditional three-electrode system. The electrochemical performances of the NiCo₂O₄ electrode materials were studied and the area capacitance was found to be 1.26 C·cm^-2 at a current density of 1 mA·cm^-2. Furthermore, outstanding cycling stability with 97.6% retention of the initial discharge capacitance after 10000 cycles and excellent rate performance (67.5% capacitance retention with the current density from 1 to 14 mA·cm^-2) were achieved. It was found that the Ni foam supporting the NiCo₂O₄ nanosheets increased the conductivity of the electrode materials. However, it is worth noting that the contribution of nickel foam to the areal capacitance of the electrode materials was almost zero during the charge and discharge processes. To further investigate the practical application of the as-synthesized NiCo₂O₄ nanosheets-based electrode, a device was assembled with the as-prepared samples as the positive electrode and active carbon (AC) as the negative electrode. The assembled supercapacitor showed energy densities of 0.14 and 0.09 Wh·cm^-3 at 1.56 and 4.5 W·cm^-3, respectively. Furthermore, it was able to maintain 95% of its initial specific capacitance after 10000 cycles. The excellent electrochemical performance of the NiCo₂O₄ nanosheets could be ascribed to their unique spatial structure composed of interconnected ultrathin nanosheets, which facilitated electron transportation and ion penetration, suggesting their potential applications as electrode materials for high performance supercapacitors. The present synthetic route can be extended to other ternary transition metal oxides/sulfides for future energy storage devices and systems.     

半导体纳米复合材料的制备及其光电催化CO2还原

本实验通过模拟植物光合作用,设计制备了新颖的光电联合催化池3D-ZnO/Ni BiVO4/FTO,用电化学沉积法制备了泡沫镍负载的ZnO纳米棒光电阴极和BiVO4光电阳极,以0.1 mol·L^−1 KHCO3水溶液作为电解质,1 mmol·L^−1曙红Y为光敏剂,在−0.6 V硅太阳电池的电压下光电催化还原CO2得到了乙醇、乙酸和甲醇,总产率22.5μmol·L^−1·h^−1·cm^−2。实现了将太阳能贮存为化学能并减少了空气中的CO2,加深了学生对绿色化学和植物Calvin循环机理的理解。     

简易多路气体分流装置在有机实验教学中的应用

介绍了一种简易多路气体分流装置,可以简单方便地将惰性气体分流供应多个学生同时使用,并确保每条支路气流量充足。该套装置可以提高操作的安全性同时减少资源的浪费,它拆装方便,可以在不使用时进行存放储藏,有效地减小占有空间。     

电化学促进铱催化乙烯基C-H键官能团化高效合成α-吡喃酮

电化学有机合成技术在过去十年来蓬勃发展,越来越受到学术和企业界合成化学工作者的青睐[1-5].跟传统化学反应相比,它的优势是利用电流代替常规的化学氧化剂或还原剂来促进化学反应,同时通过电势的调节,实现独特的反应性和化学选择性.电化学和过渡金属协同催化的碳氢键官能团化修饰(C-Hfunctionalization),不仅有效避免底物的预官能团化,而且为逆合成分析提供了可能的新颖断键方法,日益成为一种更为绿色经济的反应类型[6].     

可用于连续识别Cu^2+和阴离子、中性分子荧光探针的研究进展

铜(Cu)含量的高低直接影响着生命体的正常运转和自然体系的平衡.检测铜离子的方法多种多样,其中具有较高敏感度和选择性的荧光化学传感器应用更加广泛.综述了以Cu^2+为基的荧光化学传感器通过"替换"法实现了对阴离子S^2-, CN^-, H2PO4^-, PPi和I^-以及中性分子ATP、ADP和生物硫醇等的连续识别的研究进展.     

碱金属盐催化1,2,4-三唑与α,β-不饱和酮及二酰亚胺的氮杂Michael反应

发展了一种高效的碱金属盐催化1,2,4-三唑与α,β-不饱和酮及α,β-不饱和二酰亚胺的氮杂Michael加成反应的新方法,以中等到优异的产率得到目标产物.该方法原料易得,底物普适性好,反应条件温和,易实现克级规模的制备.产物容易转化为相应的γ-氨基醇.